LEDLenser MT10 Rechargeable Flashlight | Led Lenser Distributor

What’s included: LED Lenser MT10 flashlight, rechargeable battery, belt clip, USB charging cable (no plug adapters), nylon belt holster and lanyard

Features of LEDLenser MT10 Flashlight:
• Advanced Focus System™
    ▹ adjustable spot to flood focus (pull/push head of the flashlight)
• 3 brightness levels plus Strobe
    ☼ High – 1000 lumens, 6 hour runtime, 180m beam range
    ☼ Medium – 200 lumens, 15 hour runtime, 100m beam range
    ☼ Low – 10 lumens, 144 hour runtime, 20m beam range
• maximum beam range of 590 feet (180 meters)
• waterproof to IPX4 standard (not dive rated)
• mid-body electronic switch
    ▹ press for on or off
    ▹ press again within 2 seconds to change brightness level
    ▹ after 3 seconds, the next press turns the light off
• battery status indicator located in switch
    ▹ green – more than 50% remaining power
    ▹ yellow – less than 50% remaining power
    ▹ flashing red – extremely low power, charge immediately
• 3 operation modes
    ▹ Mode 1 – high > medium > low; hold switch until light blinks 1x
    ▹ Mode 2 – low > medium > high; hold switch until 2 quick blinks
    ▹ Mode 3 – high > medium > low + flashing; hold switch until 3 quick blinks
• lockout mode – prevents the switch from operating
    ▹ hold switch until 4 quick blinks
    ▹ to unlock, hold switch until light blinks once
• powered by one 18650 Li-ion rechargeable battery, included
    ▹ recharges in approximately 4 to 6 hours
• charge using included USB charging cable (adapter plugs not included)
• charging status indicator located in switch
    ▹ steady red – charging
    ▹ green – charging is complete
    ▹ flashing red – error (check connections)
• anodized aluminum body
• measures 5″ long x 1.26″ head diameter x 1.06″ body diameter
• weighs 5.5 ounces with battery
• made in China
• 7 year limited warranty through LED Lenser USA | limited 2 year battery warranty